4. The following progress of initialization in the left pane is displayed.
5. Wait until the processing is completed to 100%.
A guideline of initialization time is shown in the following table.
Table 4-17 Guideline of initialization
Single disk capacity Initialization time
147GB (SAS HDD) Approximately 20 minutes
300GB (SAS HDD) Approximately 40minutes
600GB (SAS HDD Approximately 80 minutes
900GB (SAS HDD) Approximately 120 minutes
200GB (SAS SSD) Approximately 20 minutes
Tip: The initialization time varies depending on the single disk capacity
regardless of the RAID level or disk array capacity.
4-54
MegaRAID WebBIOS for storage expansion blades
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
