Hitachi Compute Blade 500 Series - Page 318

Menu items Description Reference
Configuration
Management
• Creates virtual drives.
• Deletes virtual drives.
•
Displays virtual drives.
• Imports configuration
information.
Configuration
Management: Creating
virtual drives on page
5-11
Controller
Management
• Displays the disk array controller
information.
• Sets the disk array controller.
•
Deletes virtual drives.
Controller Management:
Controller management
menu on page 5-12
Virtual Drive
Management
• Configures logical drives.
• Executes tasks of virtual drives.
•
Displays virtual drive information.
Virtual Drive Management:
Virtual drive management
menu on page 5-13
Drive Management • Displays physical drive
information.
• Executes tasks of physical drives.
•
Assigns hotspare.
• Unassign hotspare.
• Displays hotspare configuration
information.
Drive Management:
Physical drive management
menu on page 5-17
Hardware
Components
1
Manages batteries. -
Note:
1. Do not select this item which is not supported.
5-10
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide