• Create Virtual Drive and Create Virtual Drive – Advanced menus are
displayed when there is a physical drive to create logical drives.
• View Drive Group Properties is displayed when a logical drive has been
created.
•
Manage Foreign Configuration is displayed when there is inconsistency in
configuration information.
Controller Management: Controller management menu
You can display and set hardware information of the disk array controller, and
delete all virtual drives already created simultaneously.
1. Select Controller Management on the Main Menu window, and press
Enter
.
2. Controller Management window appears.
Menu items Description Reference
Set Factory
Defaults
Return all setting values to the
default.
-
Clear Configuraion Deletes all virtual drives under
the disk array controller.
To delete all virtual drives
on page 5-37
Select Boot Device Sets a virtual drive to use as a
boot drive. (Not supported)
Do not select this item due
to not supported.
Advanced… Sets the disk array controller. Disk array controller
settings on page 5-21
5-12
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
