Note: Do not use "Set Factory Defaults", which requires to change the
setting value to the recommended value.
Virtual Drive Management: Virtual drive management menu
You can create and display virtual drives; execute tasks; and delete all virtual
drives already created simultaneously.
1. Select Virtual Drive Management on the Main Menu window, and press
Enter.
2. Virtual Drive Management window appears. Select a virtual drive to
check information, and press Enter.
3. The virtual drive information is displayed.
Menu items Description Reference
Operation Executes a task to the virtual drive. Executing tasks on a virtual
drive on page 5-14
Name displays and sets virtual drive
name.
Naming a virtual drive on
page 5-15
Raid Level RAID level on the virtual drive RAID0 / RAID1 / RAID10
Status Status of the virtual drive Optimal / Degraded / Offline
Size Size of the virtual drive -
View Associated
Drives
Create virtual drives.
Displays the virtual drive
information.
-
SAS 3004 iMR ROMB Configuration Utility
5-13
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
