Hitachi Compute Blade 500 Series - Page 322

Menu items Description Reference
Advanced… Displays and sets the virtual drive
information in detail.
Changing advanced settings
on a virtual drive on page
5-16
Note: Do not select RAID 10 that is not supported.
Executing tasks on a virtual drive
Follow the steps below to execute tasks on a virtual drive.
1. Select Operation, and press Enter.
2. The following appears in the middle of the window.
Menu items Description Reference
VirtuaDdrive Erase
1
Initializes the virtual drive. -
Check Consistency Executes consistency check on
the virtual drive.
Consistency check on
virtual drives on page
5-41
Slow Initialization Initializes all areas of the virtual
drive.
Initializing virtual drives
on page 5-34
Fast Initialization
1
Initializes the virtual drive at
high speed.
-
Reconfigure Virtual
Drives
1
Expands the virtual drive
capacity.
-
Delete Virtual Drives Deletes the virtual drive. To delete virtual drives
respectively on page
5-39
5-14
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide