9. Hot spare is set to the physical drive.
Unassigning Hotspare
This section describes the procedure for unassigning hotspare.
1. Select Drive Management from the Main Menu, and press Enter.
2. Select the hot-spare physical drive to unassign and press Enter.
3. Select Operation
and press Enter.
4
. Select Unassign Global Hot Spare Drive and press Enter.
5. Select Go and press Enter.
SAS 3004 iMR ROMB Configuration Utility
5-43
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
