Hitachi Compute Blade 500 Series - Virtual Drive Setting with Red hat Enterprise Linux 6

3. Execute, using such as double-click, swrset.bat in the following folder
contained in Driver Kit for Windows Server 2012 DVD.
d:\
WinSrv2008\Utility\SWRSET
Where d is the CD/DVD drive.
Virtual drive setting with LSI Software RAID is complete.
Virtual drive setting with Red Hat Enterprise Linux 6
This subsection describes how to set virtual drives on Red Hat Enterprise
Linux 6.
1. Restore the OS using the backup data, start the OS, and log on as root.
2. Insert Driver & Utility CD into the CD/DVD drive, and check Mapped on
the following Virtual Media Session window.
3. Mount Driver & Utility CD on any directory. In the following steps, Driver
& Utility CD is mounted on /media/cdrom
4. Execute the following command to start utility installation script in Driver
& Utility CD.
5. The following Select Utilities To Install menu appears. Check LSI S/W
RAID setting - 01 (Set the RAID setting).
6-54
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide