Hitachi Compute Blade 500 Series - Page 446

The following table shows description of items in the window.
Table 7-3 SAS topology
Menu items Description
Setting/display
value
LSI2004 (06:00) Disk array controller name with the
bus number and device number from
the left in parentheses
Unchangeable
Controller Item name Unchangeable
Controller
Phy 0/Phy 1
Item name: disk array controller
Physical 0/Physical 1
Unchangeable
Device Identifier Identifier for the device Unchangeable
Device Info Device information Unchangeable
Negotiated Link Speed
(Gbps)
Negotiated Link Speed Unchangeable
Maximum Link Speed
(Gbps)
Maximum Link Speed Unchangeable
Note: Do not use other key functions unless instructed otherwise.
4. Select the area enclosed by the box in red, and press Enter.
7-12
SAS configuration utility
Hitachi Compute Blade 500 Series EFI User's Guide