106
9. Troubleshooting
Phenomenon: Cannot communicate with the projector. Wireless network) continued)
1. Common continued)
Item to be checked Solutions
Does the IP address oYerlap with
that of the other deYices"
When the IP address oYerlaps, turn off your
Wi-Fi
®
deYice and turn on again.
Is WIRE/ESS NETWORK set to
OFF"
Set WIRE/ESS NETWORK to ON.
Is the wireless adapter connected
to the projector"
Insert the wireless adapter to the USB TYPE A
port of the projector.
2. SIMP/E ACCESS POINT
Item to be checked Solutions
Are oYer 10 deYices connected to
the projector"
Con¿rm the number of the deYices connected
to the projector. Up to 10 deYices can be
connected to the projector in Simple Access
Point mode.
When the projector is connected to the
maximum numbers of deYices, connect after
disconnecting the deYice currently connected.
To Next Page
Loading...
