16
2.1.2 Connection in Infrastructure Mode
Set the following when connecting the projector and the computer in Infrastructure
mode.
Projector setting
1) Turn on the projector.
2) Press the MENU button on the remote control or the control panel of the
projector.
The MENU you last used will appear.
Use the cursor button to select the following.
EASY MENU > AD9ANCED MENU > NETWORK > NETWORK SETUP >
WIRE/ESS SETUP
3) Set the following items in WIRE/ESS SETUP.
MODE: INFRASTRUCTURE
DHCP
IP ADDRESS
SU%NET MASK
DEFAU/T *ATEWAY
DNS SER9ER
SSID
ENCRYPTION
As for setting an IP address, refer to About IP address.
19)
Select APP/Y, then press the ENTER button to reÀect the settings.
2. Connection to the network
To Next Page
Loading...
