84
7. Network Bridge Function
This projector is eTuipped with the NETWORK %RID*E function to perform
mutual conYersion of a network protocol and a serial interface.
%y making use of the NETWORK %RID*E function, a computer connected to the
projector Yia wireless or wired /AN is able to control an external deYice Yia RS-
232C communication using the projector as a network deYice.
7.1 Connecting devices
1) Connect the projector’s LAN port to the computer’s /AN port with a /AN cable,
or connect the wireless adapter to the USB TYPE A port.
2) Connect the projector’s CONTROL port and the deYice’s RS-232C port with an
RS-232C cable, for RS-232C communication.
%efore connecting the deYices, read the manuals for the deYices to
ensure the connection.
For RS-232C connection, check the speci¿cations of
each port and use the suitable cable.
Connection to the ports in the Operating
*uide - Technical)
NOTE
7. Network %ridge Function
RS-232C
RS-232C cable
CONTROL port
LAN port
External deYice
Wired /AN
/AN cable
Computer
Protocol change
TCP/IP data Serial data
USB TYPE A port
Wireless adapter)
Wireless
/AN
To Next Page
Loading...
