40
SETUP Menu
SETUP Menu (continued)
Item Description
WHISPER
Using the ▲/▼ buttons turns off/on the whisper mode.
NORMAL
Ù
WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
MIRROR
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL
Ù
H:INVERT
Ù
V:INVERT
Ù
H&V:INVERT
If the Transition Detector is TURN ON and MIRROR status is
changed, Transition Detector Alarm (
56) will be displayed when
projector is restarted after the power switch is turned off.
MONITOR OUT
The combination of a picture shown on screen and output from the
RGB OUT port can be arranged in the menu.
The picture coming into the port selected in the (2) is output to the
RGB OUT port while an image from the port chosen in the (1) is on
screen.
(1) Choose a picture input port using ▲/▼ buttons.
QUIT
Ù
RGB1
Ù
RGB2
Ù
HDMI
STANDBY
Ù
VIDEO
Ù
S-VIDEO
Ù
COMPONENT(Y, C
B
/P
B
, C
R
/P
R
)
• Choose STANDBY, to select the output signal from the RGB OUT
port in the standby mode.
• While QUIT is selected, pressing the ◄
button returns to the previous menu.
(2) Select one of the
RGB ports using ◄/►
buttons.
RGB1
Ù
RGB2
Ù
OFF
• OFF disables the
RGB OUT port.
To Next Page
Loading...
