When the connection to the projector could not
be established, an error message, “Network
Connection not established”, will come up.
Click
the
[OK] then the “LiveViewer” main
menu is displayed even though the network
is not established. Click on the main menu
to go back to item 1.5 Selecting the network
connection method. (
&14)
1.8.2 Connection error
1.8 Conrming the connection to your destination (continued)
•
If My Connection is selected and the connection could not be established,
the “LiveViewer” main menu will not be displayed.
Check the network setting in the
projector, and retry the connection from item 1.3.2 Staring the “LiveViewer”.
(
&9)
NOTE
1. Connection to the network
To Next Page
Loading...
