Hitachi CP-WX8240 - Page 46

46
3. Web Control
3.2 Crestron e-Control
®
- Tools window (continued)
3 Projector (continued)
Congures the network settings of the projector.
Item Description
DHCP Enables DHCP.
IP Address Congures the IP address when DHCP is disabled.
Subnet Mask Congures the subnet mask when DHCP is disabled.
Default Gateway Congures the default gateway when DHCP is disabled.
DNS Server Congures the DNS server address.
To apply the settings, click the [Send] button.
4 User Password
Congures the User Password. To prompt the entry of User Password before
starting e-Control
®
, select the checkbox.
Item Description
New Password
Congures the password.
You can specify a password up to 26 alphanumeric characters.
The usable symbols are space and the following:
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
Conrm
Reenter the above password for verication. If the password is
incorrect, an error message is displayed.
To apply the settings, click the [Send] button.
5 Admin Password
Congures the Admin Password. To prompt the entry of Admin Password before
displaying the Tools window, select the checkbox.
Item Description
New Password
Congures the password.
You can specify a password up to 26 alphanumeric characters.
The usable symbols are space and the following:
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
Conrm
Reenter the above password for verication. If the password is
incorrect, an error message is displayed.
To apply the settings, click the [Send] button.