7
PJLink command (continued)
Commands Control Description Parameter or Response
LAMP ? Lamp Status inquiry
1st number (digits 1 to 5): Lamp Time
2nd number : 0 = Lamp off, 1 = Lamp on
INST ? Input Source List inquiry 11 12 13 21 22 23 24 31 32
NAME ? Projector Name inquiry
Responds with the name set in "PROJECTOR NAME"
of "NETWORK"
INF1 ? Manufucturer's Name inquiry HITACHI
INF2 ? Model Name inquiry
CP-X10000 (XGA model)
CP-WX11000 (WXGA model)
CP-SX12000 (SXGA+ model)
INFO ? Other Information inquiry Responds with the factory information and so on
CLSS ? Class Information inquiry 1
NOTE • The password used in PJLink
TM
is the same as the password set in
the Web Brouwser Comtrol. To use PJLink
TM
without authentication, do not set any
password in Web Browser Control.
• For specifi cations of PJLink
TM
, see the web site of the Japan Business
Machine and Information System Industries Association.
URL: http://pjlink.jbmia.or.jp/
To Next Page
Loading...
