51
CPX1(M1-20)
14. Replacing the BOTTOM CASE
Be sure to do following works before changing the BOTTOM CASE.
a. Make sure the contents of the SP cushion assembly (P#:MU04391)
Cushion A ..........................................2pcs
Cushion B ..........................................2pcs (circle)
b. Stick the 4 pieces of the cushions to the BOTTOM CASE.
1) Stick two pieces of cushion A to the stand for speaker.
cushion A
(32)
2) Stick two pieces of cushion B to the BOSS.
cushion B (piled) (32)
To Next Page
Loading...
