Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)03-03-10]
Rev.0.1
INST(RM)03-03-10
3.3 Checking the Drive Removal by Maintenance Utility
1. <Drive Removal Preparation Completion Window>
Click [Remove].
NOTE : The error list window is displayed if multiple errors are detected by the prior check.
If it is displayed, click the text of “Error Code” and recover the failures or the
blockade in accordance with the details of the displayed errors.
2. <Drive Removal Completion Window>
Check that the following message is displayed and click [Close].
If a message other than the described is displayed, refer to Message Section (MSG00-00).
To Next Page
Loading...
