Hitachi DKC910I - 3 Removing Drives; Before Removing Drives

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)03-01-10]
Rev.1
INST(RM)03-01-10
3. Removing Drives
Decide drive position to be removed referring to “Relational Drive position with Parity Group”
(INST(AD)01-02-10).
NOTE : • When removing the Drives included in the parity group, it is necessary to delete the
parity group in advance. Refer to “Deleting Parity Group” (WEBCON03-450).
• When removing the Drives allocated to the Spare Drive, it is necessary to
delete the Spare Drive in advance. Refer to “Allocating/Deleting Spare Drives”
(WEBCON03-390).
3.1 Before Removing Drives
1. Connecting the Maintenance PC
Connect the Maintenance PC to the SSVP, and then log in to the SVP.
• “Attachment/Removal Procedure of Maintenance PC” (INST(IN)13-02-10)
• “Connection to the SVP” (SVP01-30)
2. Starting the SVP window
From the menu of Web Console, click [Maintenance Components] - [Maintenance Other Components].
3. Changing the operation mode
Change the mode to [View Mode].
4. Starting Maintenance Utility
In the SVP window, click [Maintenance Utility] (See “Starting Maintenance Utility” (MU01-10).).