4 - 15
Troubleshooting > Display of Error Codes and Troubleshooting
4-3-4
Disc Load Check Flowchart
Check the following only when an instruction for referring to this chart is given in “Table 4-3-1
Major Error Codes and Troubleshooting” on the previous item.
Caution
Laser light striking the eye may cause your eyesight to be lost: For safety, be sure to remove any power
supply (AC adapter/charger, battery, etc.) from the DVD video camera/recorder before starting work.
No
Ye s
Ye s
No
No
Ye s
No
Ye s
No
Ye s
No
Ye s
No
Ye s
Check the disc loaded status.
Is a single-sided
disc used?
Is disc loaded with the
recording surface facing
the optical pickup?
Load the disc with the
recording surface facing
the optical pickup.
Is disc properly
attached to the
turntable?
Push the disc onto the
turntable until a click is
heard.
Is there a foreign
object in the vicinity
of turntable?
Remove the foreign
object.
Is disc usable on the
DVD video camera/
recorder loaded?
Load a usable disc in
the DVD video camera/
recorder.
Is turntable damaged?
Replace the DVD drive
unit.
Is optical pickup dirty?
Clean the optical
pickup
(*1)
.
Replace the DVD drive
unit.
*1: Refer to "4-3-5 Cleaning disc and optical pickup"
Fig. 4-3-2 Disc Load Check Flowchart
To Next Page
Loading...
