What does 'UNFORMAT DISC' mean on my Hitachi DZ-GX5020A K?
If your Hitachi Camcorder displays 'UNFORMAT DISC', it means an unformatted or logically damaged disc was loaded. Try formatting the disc, but be aware that this will erase all data. If that doesn't work, the disc may be dirty, so clean it, or replace the disc entirely.
Why does my Hitachi DZ-GX5020A K Camcorder show 'Card error'?
If your Hitachi Camcorder displays 'Card error', it could be because the card terminals are dirty. Try cleaning them with a dry cloth. It can also appear if data other than photos is recorded on the card, in which case you should replace the card.
What does 'Disc error has occurred' mean on my Hitachi DZ-GX5020A K Camcorder?
If your Hitachi Camcorder shows 'Disc error has occurred', it might be due to a dirty disc. Clean the disc. It could also be because the disc has been edited on another device, causing a data mismatch. In this case, format the disc (this will erase all data) or replace it.
What to do if my Hitachi DZ-GX5020A K Camcorder says 'Card full'?
If your Hitachi Camcorder displays 'Card full', it means the recording capacity of the card has reached its limit. You can either replace the card with a new one or delete unnecessary stills to free up space.
What to do if my Hitachi Camcorder says 'CHECK DISC'?
If your Hitachi Camcorder displays 'CHECK DISC', it may be because the disc is dirty, scratched, or distorted. Clean the disc, or if it's damaged, replace it with a new one. Also, ensure that the disc type is compatible with your camcorder.
General| Type | Camcorder |
|---|---|
| LCD Screen Size | 2.7 inches |
| LCD Screen Pixels | 123, 000 pixels |
| Viewfinder | Color |
| Audio Recording Format | Dolby Digital 2.0 |
General safety warnings and precautions before servicing.
Technical specifications including CCD sensor, lens, zoom, and recording capabilities.
Step-by-step guide for diagnosing and resolving operational problems with the camera.
Information on error messages displayed by the camera and corresponding troubleshooting steps.
Procedures for displaying and clearing error codes, and troubleshooting major issues.
Methods for viewing error codes and how to clear them from the system.
A table listing common error codes and their recommended troubleshooting actions.
Instructions for cleaning the disc and the optical pickup to resolve playback issues.
Procedures for checking firmware versions and updating the camera's software.
Detailed instructions on how to update the camera's firmware using a disc or card.
General troubleshooting guide for various symptoms like power issues, disc problems, and signal errors.
Flowcharts to diagnose specific issues, starting with power-related problems.
Step-by-step guide on how to safely remove a disc from a malfunctioning camera.
Information on system reset and resetting camera functions to factory defaults.
Detailed step-by-step instructions for disassembling various parts of the camera.
Procedures for backing up and writing EEPROM data, crucial after replacing the MAN circuit board.
Instructions on how to back up the EEPROM data from the camera to a PC.
Instructions on how to write backed-up EEPROM data to a new EEPROM chip.
Process for creating reference data required for camera adjustments.
Preparation steps and required equipment for performing camera adjustments.
A comprehensive list of all adjustable parameters within the software.
Identifies which adjustments are necessary after replacing specific major internal components.
General procedure for performing various camera adjustments using the software.
Procedure for adjusting the video output level using an oscilloscope.
Steps for calibrating the autofocus system using a backfocus chart.
To Next Page