Recording (Dubbing) Images
• Before connecting this DVD video camera/recorder to another device,
be sure to turn both devices off.
• Insert a recordable disc .1 or card .2 into this DVD video camera/recorder
(see pages 22 and 23).
Before You Begin .1 No photo can be recorded on DVD-RW/DVD-R/+RW,
*2 Only photos can be recorded: No video can be recorded.
• If you operate the DVD video camera/recorder connected to another
device, always power the camera/recorder from AC outlet using the AC
adapter/charger.
RECORDING (DUBBING) IMAGES ON OTHER VIDEO DEVICES
You carl record (dub) images played back on this DVD video camera/recorder, on other video
devices.
Use the AV/S output cable (provided) to connect the DVD video camera/recorder to another video
device as shown in the following figure:
* If the video device to be connected has an S-VIDEO input jack, you can connect it to the DVD video camera/
recorder.
1Press the DISC NAVIGATION button.
2 Select a scene to be played back.
3 Set tile channel of the connected video device
to an external input.
4 Press the playback ()"/||) button on this DVD
video camera/recorder and the record button
on connected device: The DVD video
camera/recorder will start playback and the
r_corded device will record (dub) it.
Note:
• Using S-VIDEO will enable you to record clearer
images.
• Reduce the volume of external input sound heard
from the built-in speaker: The loud volume may cause
noise to enter the recorded image,
• It is recommended that you use Disc Navigation to
create a play list including the scenes to be dubbed
among the scenes recorded on this DVD video
camera/recorder (p. 90),
107
To Next Page
Loading...
