Hitachi DZ-GX5080A - ADJUSTING COLOR DENSITY (COLOR LEVEL); ALWAYS DISPLAYING IMAGE IN VIEWFINDER

ADJUSTING COLOR DENSITY (COLOR LEVEL)
You carl adjust the color density of the LCD monitor screen and viewfinder.
1Press the MENU
button, use the I_1/
ll'l_ l _ l ld_ l li'l l l
buttons to choose
"LCD/EVF Adjust" on
the "LCD/EVF Setup" menu screen, and then
choose "Color Level".
Note:
• The color setting will be stored in memory even after
the DVD video camera/recorder is turned off,
• Even if the brightness or density of LCD monitor
screen or viewfinder is changed, the brightness or
density of the recorded image itself will not change.
The color density adjustment bar will appear
on the screen.
2 Use the _1/I_ buttons
for adjustment.
Press _1_ :
For lighter colo1:
Press _ :
For denser colo1:
adjustment bar
ALWAYS DISPLAYING IMAGE IN VIEWFINDER
1Press the MENU
button, use the I_1/
l"l_l / "_l /l"l" /l_lll
buttons to choose "EVF
Display" on the "LCD/
EVF Setup" nrenu screen.
2 Choose "On" and decide it.
Auto: If the LCD monitor is open, no image
will appear in the viewfinder.
On: lmages will always appear in the
viewfinder regardless of whether the
LCD monitor is open/closed.
Note:
The setting on EVF Displaywill be stored in memory
even after the DVD video camera/recorder isturned off.
35