|
Zooming
If you continue to hold the zoom lever on the
"T" control side with Dig. Zoom specified, the
digital zoom will be activated midway (when
optical 25-power is exceeded on DZ-GXS000A or
optical 30-power is exceeded on DZ-GXS080A/
GXS020A).
You can zoom up to 1200-power on DZ-
GXS000A; up to 1500-power on DZ-GX5080A/
W: recording wide area
(wide-angle)
\
GX5020A.
F: recording enlarged
image (telephoto)
1 Press the MENU button, choose "Dig. Zoom"
on the "Camera Functions Setup" menu
screen, and then press the I_/|| button.
2 Choose the desired magnification, and then
press the I1_/|| button.
3 Press the MENU button to end the setting.
Moving the zoom lever will display the
digital zoom bal_
Note:
• The digital zoom setting will be stored in memory
even if the DVD video camera/recorder is turned off.
• If you set zoom to "1500x ''.1 when recording photo,
the digital zoom will be up to 120x .2.
• When a subject is zoomed, it may be momentarily out
of focus.
• When digital zoom is engaged, the image quality will
be rougher.
"1 "1200x" on DZ-GXSOOOA.
*2 lOOx on DZ-GXSOOOA.
MACRO RECORDING
Use the macro function when recording a small object h:om close-up position: You can shoot the
subject as close as approximately 13/16" (2 cm) from the lens _surface, magnifving_ , the image to fill
the screen.
1Aim the DVD video canrera/recorder at the
subject, and press the zoom lever to "W"
control side.
Note:
• Zoom can be used, but the subject may not be
focused, depending on the distance to the subject, In
this case_ move the zoom to "W" control side to focus.
• The amount of light tends to be insufficient during
macro recording: If the subject image is too dark use
additional lighting,
5O
To Next Page
Loading...
