Hitachi DZ-GX5080A - SWITCHING QUALITY OF STILL IMAGE (QUALITY); SELF-TIMER

SWITCHING QUALITY OF STILL IMAGE (QUALITY)
You can switch the still recording quality only when using card.
1Press the MENU button, use tile I_1/1_1_1/
_'II/10"/I_/11 buttons to choose "Quality" on
the "Record Functions Setup" menu screen,
and then press the I_'/|| button.
2 Choose the option you want, and then press
the I,,/11 button.
3Press tile MENU button to end the setting.
Note:
• The still quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
• The quality of photos recorded on DVD-RAM is
equivalent to "FINE" on card.
SELF-TIMER
You can record photos using the self-timer function, as with ordinary cameras.
1Press the MENU button, use the I_1/1101/
_I/1_/1_/11 buttons to choose "Self Timer"
on the "Record Functions Setup" nrenu
screen, and then press the I_/11 button.
2 Select "On", and then press the I_/11 button.
The self-timer will be set.
3 Press the MENU button to end the setting.
4 Press the PHOTO button.
The recording indicator at the front of DVD
video camera/recorder will blink.
The self-timer indicator will start to count
down, and recording will commence
approximately 10 seconds later.
Note:
• You can also check that self-timer has been set by
reviewing the on-screen information.
• To release the self-timer mode, choose "Off" on the
menu screen or turn DVD video camera/recorder off.
• To suspend self-timer, press the PHOTO button again
before recording starts, or press the • button.
63