Hitachi DZ-GX5080A - DIRECTING SCENES EFFECTIVELY (EFFECT - FADE)

DIRECTING SCENES EFFECTIVELY (EFFECT- FADE)
You can add fading to the beginning and/or end of scene.
There are three types of special effects:
Fade Out Fade Out Fade Out
Fade In Fade In
White: Wipe:
Fades in from white screen Fades in from black screen
Fades out to white screen to vertical direction of screen
Fades out from vertical
direction of screen to black
screen
Fade In
B/W:
Fades in from Black and
White screen to color screen
Fades out from color screen
to Black and White screen
1Press the DISC NAVIGATION button.
2 Select the scene for adding special effects.
3 Press the MENU button.
7 Press the • button to quit.
The ",41" and/or "1_" icon(s) will appear in
the scenes for which fade in and/or fade out
have been set.
4Choose, "Scene", "Effect", "Fade" and then
press the I"/11 button.
5 The "Fade" screen will appear: ]f you are sure
you want to add tile fade effect to the scene,
press the I1,,/|| button.
If you want to change the scene to which fade
is added, you can change it on this screen.
6Select the special effects for "IN" and/or
"OUT", choose "Enter", and then press the
I_/11 but[on.
"In"effect _ i
"Out" effect
Note:
Ifa disc on which fade has been set on scene with this
DVD video camera/recorder is played on a DVD
reorder/player,or the scene is captured into a PC, the
set fade will not be reflected(see Noteon page 74).
You can use I_1_/_1_ to move the cursor to
"IN", "OUT", "Enter" or "Cancel".
Use '_1/11,'_ to choose the effect to be added,
and then press I1"/|| to set the effect.
To cancel setting, choose "Cancel".
If you choose "Enter" and press I_/|l, the
"Fade" screen will be restored after a message
appears.
Repeat steps 5 and 6 to add fade to other
sceiles.
8O