Hitachi DZ-GX5080A - SWITCHING TO DISPLAY OF EACH PLAY LIST (SELECT); Editing on play list; PLAYING BACK A PLAY LIST (PLAY)

|
ADDING SCENES TO PLAY LIST (EDITING PLAY LIST)
1Press the DISC NAVIGATION button.
2 Press the MENU button.
3Usethe I_1/_1/_1_/
l't_/l'/ll buttons to
choose "Edit" on the
"PlayList" menu screen,
and then press the I_/||
button.
4Use the play list select
screen to select the play
list to which you wish
to add scenes, and then
press the _'/|| button.
The scenes of the
program that was
displayed in step 1 will
appear irr the upper
row, and the scenes of
selected play list will
appear in the lower
ro_v.
Note:
If the DISPLAY button is
pressed when the
thumbnails are displayed,
the recording date/time of
the selected scene will
appear across the bottom
of screen. Press DISPLAY Recording date/time
button again to restore the
previous screen.
5 Press the _| button to nrove the cursor to the
lower row, and press the _II or _ button to
select the point where the scene is to be
inserted.
Ed_l i P/atyL iSttr .........
_Scene to be added
[_ [.r_l_ Insertion position
"1 *2
"1: Numberof scene before insertion position cursor
*2: Number of all scenes on play list
6Press the _ button to move the cursor to the
upper row, and press the _1 or _ button to
point the cursor to the scene to be added.
7 Press the IP'/|| button to copy the scene.
After adding scenes is completed, the edited
play list will appear.
Repeat steps 5 - 7 to add other scenes.
8 Press the • button: The screen for x erifying
exit will appear.
Note;
• The "?' mark shows the position where the scene is
to be added.
• You can also select multiple scenes (p. 73).
• Pressing • in the middle of adding scenes will display
the screen for verifying an exit from "Edit PlayList".
Choose "YES" to exit the edition of play list. Choosing
"NO" will restore the "Edit PlayList" screen.
• If you press the MENU button in step 5 or 6, the
submenu screen for editing play list will appear. You
can also use this submenu to add scenes (p. 78).
92