Hitachi DZ-HS300A - Adjusting Color Density (Color Level); Always Displaying Image in Viewfinder

English
39
ADJUSTING COLOR DENSITY (COLOR LEVEL)
You can adjust the color density of the LCD monitor screen and viewfinder.
1 Press the MENU
button, use the f/
e/d/c/A
buttons to choose
“LCD/EVF Adjust” on
the “LCD/EVF Setup” menu screen, and then
choose “Color Level”.
The color density adjustment bar will appear
on the screen.
2 Use the d/c buttons
for adjustment.
Press d :
For lighter color.
Press c :
For denser color.
3 Press the A button to end the setting.
Note:
• To stop the setting midway, press the MENU button.
• The color setting will be stored in memory even after
the DVD video camera/recorder is turned off.
• Even if the brightness or density of LCD monitor
screen or viewfinder is changed, the brightness or
density of the recorded image itself will not change.
ALWAYS DISPLAYING IMAGE IN VIEWFINDER
1 Press the MENU
button, use the f/
e/d/c/A
buttons to choose “EVF
Display” on the “LCD/
EVF Setup” menu screen.
2 Choose “On” and press the A button.
Auto: If the LCD monitor is open, no image
will appear in the viewfinder.
On: Images will always appear in the
viewfinder regardless of whether the
LCD monitor is open/closed.
Note:
The setting on EVF Display will be stored in memory
even after the DVD video camera/recorder is turned off.
LCD/ EVF Adjust
EVF D i s p l a y
ENTER RETURN
LCD/ EVF Se t up
Au t o
LCD Br i ght ness
EVF Br ightness
Co l o r L eve l
ENTERADJUST
LCD/ EVF Ad j u s t
Color density
adjustment bar
LCD/ EVF Adjust
EVF D i s p l a y
ENTER RETURN
LCD/ EVF Se t up
Au t o
O n