Hitachi F1500 - Page 123

Item Specification
Maximum Number of Drive per SAS I/F
(Under the SFF HDD Standard Model)
288
Maximum Number of DKA 4
Channel I/F Support channel
type
Mainframe 2/4/8 Gbps Fibre channel:
16MS8/16ML8
4/8/16 Gbps Fibre channel:
16MS16/16ML16
Open System 2/4/8 Gbps Fibre Short
Wavelength
*2
: 16FC8
4/8/16 Gbps Fibre Short
Wavelength
*3
: 8FC16/16FC16
10 Gbps FCoE/iSCSI Short
Wavelength: 16FE10/8IS10
Data transfer
rate
MF Fibre Channel 200 / 400 / 800 / 1600 MBps
Fibre Channel 200 / 400 / 800 / 1600 MBps
FCoE/iSCSI 10 Gbps
Maximum number of CHA 12
Power AC Input Single Phase 60Hz : 200V to 240V
50Hz : 200V to 240V
Acoustic Level
*4
Operating CBXA/CBXAC/CBXB/
CBXE/CBXF
58dB (24°C or less), 60dB (32°C),
70dB (40°C)
SBX/SBXC/UBX/
UBXC/FBX
61dB (24°C or less), 64dB (32°C),
70dB (40°C)
*7
Standby
*5
CBXA/CBXAC/CBXB/
CBXE/CBXF
58dB (24°C or less), 60dB (32°C),
70dB (40°C)
SBX/SBXC/UBX/
UBXC/FBX
61dB (24°C or less), 64dB (32°C),
70dB (40°C)
*7
Dimension W x D x H (mm) Single rack 610 x 1,115 x 2,006
Six racks 3,610 x 1,115 x 2,006
Non-stop
maintenance
Control PCB Support
Cache memory module Support
Cache flash memory Support
Power supply, fan Support
Microcode Support
Drive (HDD, SSD, FMD) Support
*1
Available as spare or data disks.
*2
By the replacing SFP transceiver of the fibre port on the CHA to the DKC-F810I-1PL8, the port
can be used for the long wavelength.
*3
By the replacing SFP transceiver of the fibre port on the CHA to the DKC-F810I-1PL16, the port
can be used for the long wavelength.
*4
Measurement Condition: The point 1m far from floor and surface of the product.
Specifications 123
Hitachi Virtual Storage Platform G1000, G1500, and Virtual Storage Platform F1500 Hardware Guide