Confirm that the copy progress reaches 100%.
Adding an alternate path to the S-VOL
Add an alternate path to the S-VOL on the host using the alternate path
software. For some alternate path software the alternate path is added
automatically. Make sure that the host has recognized the GAD secondary
volume correctly.
Caution: If Hitachi Dynamic Link Manager (HDLM) is installed on the server
and host mode option 78 is set to the host group of VSP G1000, add the
alternate path, and then execute the dlnkmgr refresh -gad command to
incorporate the VSP G1000 settings to HDLM. For details about HDLM, see the
HDLM user documentation.
Configuration and pair management using CCI
4-47
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide
To Next Page
Loading...
