Hitachi G1000 - Page 152

storage system) and unvirtualize the external volume (quorum disk).
Be sure to perform this for both the primary and secondary storage.
3. Delete the command devices for global-active device pair management
servers.
a. In the Unallocate Volumes dialog box, unallocate the pair
management server and the command device.
b. On the Resources tab, in the Storage Systems tree, select the
primary or secondary storage system, and select Volumes. In the
application area, click the System GUI link.
c. From the volume list (LDEVs) that appear, select the command device
that you want to delete.
Tip: Look for Command Device in the Attribute column.
d
. From More Actions, select Edit Command Devices and in the
dialog box that appears, delete the command device.
4. Delete the global-active device virtual storage machine and remove the
secondary storage system resources from the global-active device virtual
storage machine.
Note: Before removing secondary storage system resources, you must
unallocate the volumes on the global-active device virtual storage
machine.
a. On the Administration tab, select Virtual Storage Machine.
b. Select the virtual storage machine related to global-active device pairs
and click Edit Virtual Storage Machine.
c. In the Edit Virtual Storage Machine window, select the secondary
storage system, and then select Remove Storage Systems.
Result
The global-active device environment no longer exists.
Related topics
•
Unallocating global-active device pairs on page 5-19
• Unallocating individual global-active device volumes on page 5-20
5-24
Using Hitachi Command Suite to set up global-active device
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide