Electrical safety guidelines
Even though customers do not install or maintain equipment, these guidelines are
provided to prevent possible injury when working with authorized service personnel in
the area where equipment is installed. Observe the following electrical safety guidelines:
■
Disconnect all power before installation, deinstallation, or moving equipment.
■
Ensure that the voltage and frequency of your power source match the voltage and
frequency required by the system.
■
All equipment should be properly grounded for proper operation and safety. To
reduce the risk of electric shock or damage to equipment, follow proper grounding
procedures.
Preventing electric shock
■
Before starting work, note where the emergency power-o switches are located, and
be sur
e you kno
w ho
w to oper
ate them.
■
Before starting work, be sure there are no potential electric hazards in the
maintenance area such as insucient grounding or a wet oor.
Electrical safety guidelines
Appendix G: Safety requirements
Hitachi Virtual Storage Platform G1000, G1500, and VSP F1500 Hardware Guide 165
To Next Page
Loading...
