Hitachi G1500 - Chapter 4: Site Preparation Specifications; Responsibilities; Customer Responsibilities

Chapter 4: Site preparation specifications
The following guidelines for installing VSP G1000, VSP G1500, and VSP F1500 storage
systems provide site and system requirements, and specications.
Note: For mor
e information about installation r
equir
ements and system
congurations,
contact customer support.
Responsibilities
The r
esponsibilities for site planning and pr
epar
ation ar
e shared by the system users
and Hitachi Vantara support. The required installation planning tasks must be scheduled
and completed to ensure a successful and ecient installation of the storage system.
Note: The stor
age system must be installed b
y tr
ained
Hitachi Vantara
personnel or trained authorized service providers. The storage system is not
a customer-installable product.
Customer responsibilities
Y
ou ar
e r
esponsible for completing the follo
wing tasks and preparing your site for
installation of the storage system.
■
Understand the applicable safety requirements associated with installing a storage
system.
■
Understand the installation requirements for the storage system. You can use the
information in this manual to determine the specic requirements for your
installation. As needed, r
e
vie
w the Pr
oduct Overview to familiarize yourself with the
components, features, and functions of the storage system.
■
Verify the installation site meets all installation requirements. A checklist is included in
this section to help you with this task.
■
Meet electrical power prerequisites and provide electrical hardware, including cables,
connectors and receptacles for connecting the storage system to site power.
■
As needed, work with Hitachi Vantara support to create an installation plan. Make
sure to allow enough time to complete any changes to the plan, so your site is ready
when the equipment arrives.
Chapter 4: Site preparation specications
Hitachi Virtual Storage Platform G1000, G1500, and VSP F1500 Hardware Guide 75