Note: These figures are not kilo v
alues.
SVP network configuration
In networking terms, a "network bridge" is software or hardware that
connects two or more networks so that they can communicate. For the SVP, a
network bridge refers to configuring the four onboard local-area network
(LAN) ports using the Bridge Connections setting in the Microsoft Windows
operating system. This arrangement obviates the need for an external
switching hub.
The following figure shows the SVP network configuration.
Physical LAN port assignment
The following figure shows the ph
ysical LAN port assignments on the SVP.
The IPMI port is an IPMI-dedicated port connected to the BMC in the SVP and
is invisible from the Windows operating system. The IPMI port can be used if
enabled in BIOS setting, but is not supported for the SVP.
Overview 19
Hitachi Virtual Storage Platform G200, G400, G600 Service Processor Technical Reference
To Next Page
Loading...
