Backing up the OS
Procedure
1. Boot the SVP
.
2. When the Basic Input/Output System (BIOS) screen appears, press F8.
3. Select a partition for the backup.
4. Exit the BIOS and reboot the SVP.
Restoring the OS
Procedure
1. Boot the SVP.
2. When the BIOS screen appears, press F8.
3. Select an image to restore.
4. Exit the BIOS and reboot the SVP.
Creating a network bridge
When referring to the SVP, a "network bridge" refers to configuring the four
SVP LAN ports for communication on a network.
Procedure
1. In the SVP Windows Control Panel, click Network and Sharing Center.
2. In the right pane, click Change adapter settings.
3. Before configuring a bridge, delete all network setting for the three NICs
you want to bridge.
4. Select the three NICs you want to bridge, and then right-click and click
Bridge Connections.
A new instance of the network bridge appears.
42 SVP support
Hitachi Virtual Storage Platform G200, G400, G600 Service Processor Technical Reference
To Next Page
Loading...
