Hitachi G200 - Rebooting the SVP; Backing up the SVP Configuration

Rebooting the SVP
Procedure
1. From a management console PC, connect to the SVP using Windows
R
emote Desktop Connection.
2. On the SVP, click Start in Windows desktop.
3. From the displayed menu, click Windows Security.
4. In the Windows Security window, click the up arrow option in the
power menu:
5. From the displa
yed menu, click Reboot.
Backing up the SVP configuration
In the unlikely event the SVP fails and needs to be replaced, back up the SVP
configuration file to a USB flash drive before returning the failed SVP. When
you receive the replacement SVP, you can use the USB flash drive to restore
the previous configuration on the new SVP. This procedure assumes that the
client PC is connected to the SVP using a Remote Desktop connection.
When you back up the SVP configuration, the following items are backed up:
• Parameters set in the Hitachi Device Manager - Storage Navigator
Environment window
• Connection setting to the authentication server
• Connection setting to the key management server
• Password policy for backing up the encryption key on the client PC
• Window view setting (table width) in Device Manager - Storage Navigator
• Warning message in the Device Manager - Storage Navigator login window
• Device Manager - Storage Navigator task information
• SMI-S application settings
• HTTPS and SMI-S SSL certificates, and RM
To back up the SVP configuration:
Procedure
1. From a management console PC, connect to the SVP using Windows
Remote Desktop Connection.
2. Close all Device Manager - Storage Navigator sessions on the SVP.
44 SVP support
Hitachi Virtual Storage Platform G200, G400, G600 Service Processor Technical Reference