Hitachi G200 - Power Cable Usage Guidelines

Cable and connector
Power cable usage guidelines
Hitachi
storage systems are intended for rack installation and ship with power cords.
Installation and service requirements may require additional cords and cables to be
ordered. The type of power cable required by a given installation is determined primarily
by the:
■
Type of AC line feed provided by the facility.
■
Type of AC source (wall outlet or modular and monitored PDU) to be used.
■
Serviceability of components to be connected.
Storage systems require a country-specic power cable for direct connection to a facility
AC feed.
Storage systems are designed to allow replacement of hot-pluggable components
without removing the chassis from the rack. As a result, power cables can be short
because cable movement is of minimal consideration.
Power cable usage guidelines
Appendix F: Data and power cables
Hitachi Virtual Storage Platform G200 Hardware Reference Guide 120