Number Item Description
2 DC IN LED Blue: DC input is normal.
CBSL controller
The CBSL contr
oller includes specic functional LEDs located on the front and rear of
controller and power supplies to provide its operating status.
CBSL with front panel bezel
The following table describes the denitions of the CBSL controller front panel bezel
LEDs.
Number Item Description
1 POWER LED Green: Storage system is
po
wered on.
Amber: Storage system is
receiving power.
2 READY LED Green: Normal operation.
3 WARNING LED O: Normal operation.
Amber: Component
requires maintenance.
Blink: Failure requires
maintenance.
Note: When System Option
Mode 1097 is set to ON,
the WARNING LED does not
blink, even if the following
failure service information
messages (SIM) are issued:
452xxx, 462xxx, 3077xx,
4100xx, and 410100.
CBSL controller
Chapter 2: Virtual Storage Platform G200 controllers
Hitachi Virtual Storage Platform G200 Hardware Reference Guide 27
To Next Page
Loading...
