EasyManua.ls Logo

Hitachi G200 - Service Processor Description

Hitachi G200
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Item Specification
Weight: 14 lbs (6.4 kg)
Processor Celeron G1820 2.7-GHz 2M, 2C, 2T
â– 
Cor
es: 2
â– 
Instruction set: 64-bit
â– 
SmartCache: 2 MB
â– 
Maximum memory size: 32 GB
â– 
Memory types: DDR3-1333,
DDR3L-1333 @ 1.5V
Memory 8-GB RAM DDR3
Hard drive 2 TB
Network interface card x4 ports (on-board NIC) +
x1 IPMI (BMC) port
Fans 2 x 4-cm 4-pin PWM fans
Operating system Windows Embedded Standard 7
Service processor description
The SVP provides four RJ-45 ports:
â– 
Two ports connect to the storage system controllers (one port for each controller).
â– 
One port connects to the IP network of the user.
â– 
One port connects to a user-supplied management console PC.
Note: This pr
oduct is also designed for IT power distribution systems with
phase-to-phase voltage.
Three of the four RJ-45 ports (which connect to the controllers and the IP network) are
conî ´gured as a bridge. The SVP can be addressed using the default IP address
192.168.0.15.
Service processor description
Chapter 5: Service processor
Hitachi Virtual Storage Platform G200 Hardware Reference Guide 64

Table of Contents

Other manuals for Hitachi G200

Related product manuals