Hitachi G200 - VSP G200 Electrical Specifications (DC Power Supply)

Item Controller Drive tray
FMD drive tray: 520/490 or
less
Dense intermix drive tr
ay:
1200/1160 or less
Power consumption (VA/W) CBSS: 520/500 or less
CBSL: 450/430 or less
SFF drive tray: 320/310 or
less
LFF drive tray: 280/260 or
less
FMD drive tray: 440/420 or
less
Dense intermix drive tray:
1000/960 or less
Notes:
1. The power current of Nx2 described in this table is required for a single power
unit.
2. If one power unit fails, another power unit requires electric current for the two
power units. Therefore, plan the power supply facility so that the current-carrying
capacity for one power unit can provide the total capacity for two power units.
3. This table shows the power requirement (100 V or 200 V) for the maximum
conguration . The actual required power might exceed the value shown in the
table when the tolerance is included.
VSP G200 electrical specifications (DC power supply)
Input power specications
Item CBSSD CBSLD DBSD DBLD
Rated input
voltage (v)
DC -60 to -48
Input voltage
uctuation (v)
DC -72 to -40
Input voltage
instant
uctuation (v)
DC -75 to -36
VSP G200 electrical specications (DC po
wer supply)
Appendix B: Electrical specications for VSP G200
Hitachi Virtual Storage Platform G200 Hardware Reference Guide 86