5. Click Finish.
6. In the Confirm window, review the settings and enter a task name in the
Task Name box.
7. Click Apply to save your settings in the system.
Forcibly deleting pairs
You forcibly delete a pair for the following reasons:
• A currently unpaired volume that was previously in a pair is unusable
because previous pair information is still in the volume.
• The pair cannot be connected to the secondary system because of a
communication error. In this case, delete the pair forcibly in both primary
and the secondary systems.
Prerequisite information
• The volume must be unpaired.
Procedure
1. Open the Logical Devices window.
In Hitachi Command Suite:
a. On the Resources tab, expand the Storage Systems tree.
b. Expand the target storage system, right-click Volume, and then click
System GUI.
In Device Manager - Storage Navigator:
a. Click Storage Systems, and then expand the Storage Systems
tree.
b. In the Storage Systems tree, click Logical Device.
2. Click the LDEVs tab, and then select the pair to be forcibly deleted.
3. In the LDEVs tab, click More Actions > Force Delete Pairs (TC Pairs).
4. In the Force Delete Pairs (TC Pairs) window, ensure that the volume is
in the Selected LDEV table.
7-10
Monitoring and maintaining the TC system
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models
To Next Page
Loading...
