• Changing minimum paths, round trip time, other remote connection
options on page 7-15
• Replacing a data path on page 7-17
•
Deleting remote paths on page 7-17
Caution: Do not add or delete a remote connection, or add a remote path at
the same time that the SCSI path definition function is in use.
Viewing remote connection status and path information
Procedure
1. Open the Remote Connections window.
In Hitachi Command Suite:
a. On the Resources tab, expand the Storage Systems tree.
b. Right-click the target storage system, and click Remote Connection.
In Device Manager - Storage Navigator:
a. Click Storage Systems, and then expand the Storage Systems
tree.
b. In the Storage Systems tree, click Replication > Remote
Connection.
2. Click View Remote Connection Properties to view connection
properties and path information.
7-12
Monitoring and maintaining the TC system
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models
To Next Page
Loading...
