Hitachi G200 - Changing Minimum Paths, Round Trip Time, Other Remote Connection Options

4. In the Connections (To) tab, click More Actions > Add Remote
Paths.
5. In the Add Remote Paths window, select the port type for Select Type,
and then select the port to be used for both the local storage system and
the remote storage system. If you select iSCSI, enter the IP address and
the TCP port number for the remote storage system port. If you are
adding 2 or more paths, click the Add Path button.
6. Click Finish.
7. In the Confirm window, review the settings and enter a task name in the
Task Name box.
8. Click Apply to save your settings in the system.
Changing minimum paths, round trip time, other remote connection
options
You can change remote connection options that affect how the system runs
your copy operations. These are:
• Number of minimum paths for a pair. You can find detailed information in
Determining Minimum Number of Remote Paths on page 3-7
• The interval for data transfer to complete (RIO MIH Time).
Monitoring and maintaining the TC system
7-15
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models