Error code
(SSB2)
Description
CBFF The pair cannot be created because the remote path is not valid.
FD01 The pair cannot be created because the virtual LDEV ID is not set for the volume
specified as S-VOL.
FD02 The pair cannot be created because the virtual LDEV ID is not set for the volume
specified as P-VOL.
FD03 The pair cannot be created because the specified virtual information does not match
with the virtual information registered in the secondary system.
FD04 The specified secondary system does not support global storage virtualization.
FD05 The specified primary system does not support global storage virtualization.
FD07 The pair cannot be created because the volume specified as P-VOL is used with a GAD
pair.
FD08 The pair cannot be created because the volume specified as S-VOL is used with a GAD
pair.
FD09 The pair cannot be created because the volume specified as P-VOL is a GAD reserve
volume.
FD0A The pair cannot be created because the volume specified as S-VOL is a GAD reserve
volume.
FD0B Internal process is taking time for the specified P-VOL. Retry the operation after about 5
minutes.
FD0C A TC pair cannot be created or resynchronized because the bitmap areas are not
available for either of the following reasons:
• Free space in shared memory is insufficient in the primary system.
• The pool capacity is insufficient in the DP pool of the volume specified as P-VOL.
FD0E Internal process is taking time for the specified S-VOL. Retry the operation after about 5
minutes.
FD0F The pair was not created because the data direct mapping attribute of the specified P-
VOL is enabled, and the function of R-DKC for mapping external volumes larger than 4
TB is not supported.
FD10 TrueCopy pair operation failed. T10 PI attribute settings of the P-VOL and of the S-VOL
are different.
FD12 The pair was not created because the specified S-VOL operates as the system LU of
NAS.
SSB2=B992 error codes when SSB1 = B901 or B90A
Error Code
(SSB1)
Error Code
(SSB2)
Description
B901 B992 Pair cannot be created because DKC type does not support TC
Asynchronous.
B90A B992 Consistency group information cannot be retrieved because TC or UR is not
installed.
10-16
Troubleshooting
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models
To Next Page
Loading...
