Hitachi G200 - Configuration Commands and Options; Consistency Group Commands and Options

Configuration commands and options
The following table shows the commands and options for configuring TC. For
details about the CCI commands, see the Command Control Interface
Command Reference.
Operation Option
Available in
HDvM - SN
CCI
command and options
Add Remote
Connection
Remote Storage System Yes raidcom add rcu
-rcu serial# mcu# rcu# id
Remote Paths Yes raidcom add rcu
-cu_free serial# id pid
RIO MIH Time Yes raidcom modify rcu
-rcu_option mpth rto rtt[fzd|fze]
Edit Remote Replica
Options
Copy Type Yes none
Maximum Initial Copy
Activities
Yes none
Blocked Path Monitoring Yes none
Consistency group commands and options
The following table shows the commands and options for setting up and
managing consistency groups for TC.
Note: Consistency group commands and options are not available from HDvM
- SN.
Operation
CCI
command name
Reserve CTGs paircreate
-f[g] fence[CTG ID]
Add pair to the CTG paircreate
-f[g] fence[CTG ID]
Split pairs in CTG (no reservation time) pairsplit
-S
*
Resync pairs in CTG pairresync
-f[g] fence[CTG ID]
Delete pairs in CTG pairsplit
-S
*
Volumes to be split at the same time need to be included in the same consistency group in advance.
A-2
TC CLI reference
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models