Hitachi G200 - Add Remote Paths Wizard; Add Remote Paths Window

Selected Remote Connection table
Item Description
Remote Storage System Information about the remote system's model and serial
number.
Path Group ID Path group identifier.
Number of Remote Paths Number of remote paths including those being added.
Minimum Number of Paths Minimum number of remote paths.
• TC: Range is from 1 to 8.
• UR: The minimum number is 1, regardless of the
number entered.
RIO MIH Time Time limit between 10 and 100 seconds for the data-
transfer operation to complete (15 is the default).
Roundtrip Time (msec.) Time limit between 1 and 500 milliseconds for data copy
from P-VOL to S-VOL (1 is the default).
Add Remote Paths wizard
Use this wizard to add remote paths to a remote connection.
Add Remote Paths window
Use this window to add remote paths to a remote connection.
For complete information and instructions, see Configuring additional remote
paths on page 7-14.
When you select Fibre for Select Type the following screen is displayed.
TC GUI reference
B-29
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models