A progress bar shows the replacement status.
Note: The restore operation can take up to 20 minutes to
complete. If you receive a message about a failed recovery, go to
the Customer Contact Us page at https://support.hds.com/en_us/
contact-us.html.
2. When the progress bar goes away and the completion message appears,
click Close.
3. Click the CTLs tab and confirm that all status conditions are Normal.
If necessary, click Refresh at the top-right of the window to update the
status in the window.
4. Log out and close the Maintenance Utility window.
Replacing cache memory for a NAS module
Migrate the EVS manually before replacing cache memory for a NAS module
Related tasks
•
EVS migration after servicing nodes on page 102
Blocking a NAS module
196 Replacing cache memory
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
