Note: If SEE MANUAL does not appear at the top of Location in
the Alert Detail window, go to the next step. If SEE MANUAL
appears, take action based on the reference code displayed in the
Alert Detail window. If the user takes action or contact the HDS
Support Portal at https://support.hds.com/en_us/contact-us.html,
steps 7 and beyond are not required.
7. Refer to the following table for a description of the reference codes.
Reference code
Recovery action Reference
aff20x Tighten the Cache Flash
Memory (CFM) screw if
necessary.
Replacing cache flash
memory on page 251
af400x Tighten the backup module
(BKM/BKMF) screw if
necessary.
Replacing a backup module
on page 269
af200x Check power supply (DKCPS)
connections.
Replacing a power supply on
page 141
af210x Check the connection of the
power cables on the power
supply (DKCPS).
Replacing a power supply on
page 141
af60xx Check the connection of the
power cables on the power
Replacing a power supply on
page 141
28 Verifying component failures
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
