Troubleshooting code Failure level Recovery action
System and Security >
Management Tool > Services.
2. Show the DKCMan property.
3. On the General tab, set the
Type of Start-up to Manual.
TRSDLS000011 ERROR
The system with the serial
number displayed in the log
cannot stop its service because
another user acquired the lock.
Release the lock, and then try
to stop the service.
TRSDLS000012 ERROR
The stop processing of the
Storage Device List server
timed out. If it occurs
repeatedly, stop the Storage
Device List server in the
following procedure.
1. From the Windows Start
menu, click Control Panel >
System and Security >
Management Tool > Services.
2. Show the DKCMan property.
3. On the General tab, set the
Type of Start-up to Manual.
TRSDLS000013 WARN
The service status acquisition
failed.
If this warning does not
disappear within three minutes,
stop the storage system by
Storage Device List, and then
restart it.
If it does not recover, restart
the SVP.
If the condition does not
change after restarting the SVP,
set it up again.
TRNASB000001 ERROR
NAS Unified Firmware
Configuration Backup task
cannot be registered.
Register the NAS unified
firmware configuration backup
task.
TRNASB000002 ERROR
NAS Unified Firmware
Configuration Backup task
cannot be deleted.
Delete the NAS unified firmware
configuration backup task.
348 Troubleshooting the storage system
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
