I
Hitachi Universal V2 Rack power
distribution units
The Hitachi Universal V2 Rack is equipped with specific power distribution
units (PDU) for Americas, APAC, and EMEA regions. The PDUs can provide
electrical power to the storage system in a single-phase or three-phase
configuration.
Caution:
• Before installing third-party devices into the rack, check the electrical
current draw of each device. Verify the electrical specifications and
allowable current load on each PDU before plugging the device into the
PDU.
• Balance the electrical current load between available PDUs.
□
Americas single-phase PDU 1P30A-8C13-3C19UL.P
□
Americas single-phase PDU 1P30A-15C13-3C19UL.P
□
Americas three-phase PDU 3P30A-8C13-3C19UL.P
□
Americas three-phase PDU 3P30A-15C13-3C19UL.P
□
Americas three-phase PDU 3P30A-24C13-6C19UL.P
□
APAC and EMEA single-phase PDU 1P32A-9C13-3C19CE.P
□
APAC and EMEA single-phase PDU 1P32A-18C13-3C19CE.P
□
APAC and EMEA three-phase PDU 3P16A-9C13-3C19CE.P
□
APAC and EMEA three-phase PDU 3P16A-15C13-3C19CE.P
□
APAC and EMEA three-phase PDU 3P32A-24C13-6C19CE.P
Hitachi Universal V2 Rack power distribution units 109
Hitachi Virtual Storage Platform G400, G600 Hardware Reference Guide
To Next Page
Loading...
