Number Item Description
Slow blink indicates the
FMD is in the pr
ocess of
startup. When powered,
the LED blinks for about
two to ve minutes until
the startup processing is
complete.
ALM LED Red: Drive stopped due to
a failure and can be
replaced.
Note: ACT indicator is only
printed on some types of
FMDs.
3 POWER, READY, and
LOCATE LEDs
Green: Drive tray is
powered on.
Green: Drive tray is
operational.
Amber:
■
Indicates the location of
the chassis.
■
Can be turned on or
turned o by the
maintenance utility.
4 Flash module drives Twelve ash module drives.
Slots are organized the
following way:
9, 10, 11
6, 7, 8
3, 4, 5
0, 1, 2
FMD front panel without bezel
Chapter 3: Drive trays
Hitachi Virtual Storage Platform G900 Hardware Reference Guide 38
To Next Page
Loading...
